Venetian® Plaster Marmorino Fine

Interior:Preparation: on civil plaster or old mineral paints as long as they are not powdery, are in good condition and sufficiently rough, applydirectly. On supports of the type: gesso, gypsum, plasterboard, old synthetic or powdery paints, stucco smoothingetc, apply a coat of primer to the point of saturation and subsequently a coat of VENETIAN PLASTERMARMORINO. Neutralize in advance with appropriate products the presence of stains of various types or any saline efflorescence. In thecase of irregular supports, whether interior or exterior, with uneven absorption rates, restored plaster, stains, etc., the application of alayer of Intocalce with a steel trowel is recommended in order to even out the surface and create the ideal base for even absorption.If you wish to fill the surface to a greater degree or give VENETIAN PLASTER MARMORINO FINE a more “veined” or “pointed” appearanceapply VENETIAN PLASTER MARMORINO Naturale with a steel trowel filling any cracks or imperfections in the surface . When the firstlayer is completely dry, apply a second layer to level the surface, otherwise apply VENETIAN PLASTER MARMORINO FINE directly

Apply one or two layers of VENETIAN PLASTER Marmorino FINE with a steel trowel or spatula letting each layer dry before proceeding inorder to obtain a perfectly smooth surface. At this point on the last layer , which has dried slightly, making sure that it is neithercompletely dry and nor excessively wet, proceed to the polishing by going over the surface repeatedly with a spatula, pressing hard.To confer an increased degree of water repellency and compactness to the surface apply, after about 2/3 hours, with a steel trowel andpressing energetically, a layer of Cere D'ARTE Wax or a layer of virgin beeswax ///// Application:Primer Coat Venetian Plaster Quartz PrimerFirst Coat Venetian Plaster Marmorino FineSecond Coat Venetian Plaster Marmorino FineThird Coat Venetian Plaster Marmorino FineFinishing Coat Venetian Plaster Cera D’Arte Wax

Refer to the products label and the Material Safety Data Sheet