How to paint over interior Design Effects paint

Instructions

1. Before your new look can go up, your old one must come down. To do that you’ll need 80-120 grit sandpaper, a drop sheet and some good quality masking tape.

2. Once your wall has been cleaned and dried, lightly sand the existing paint surface using an 80-120 grit sandpaper. When most of the effect has been removed, use a damp cloth to attract excess dust.

3. Once you’ve masked off your wall, paint the edges, corners and anything you’ve taped off.

4. Gently roll Acrylic Sealer Undercoat With Ultrasmooth™ onto the surface in a series of close zigzag motions. Then continue to re-roll the area with parallel strokes to create a smooth finish. This technique can be used to complete the remainder of the wall.

5. Now that your pre-coat is complete, you can begin applying your newly inspired colour or finish.