Give your shed a footy makeover

To start, find your inspiration and select a colour from the Dulux colour range – and don’t be afraid to go bold. Explore our extensive home exterior inspiration gallery or consider purchasing a sample pot to help you choose the perfect colour for your project.

To avoid any accidental spills, prepare the area by moving bikes, plants or outdoor furniture that are too close to the shed. Brush away any dirt and clean the fence using Selleys Original Sugar Soap and lay down your drop sheet to protect from drips.

Test if the paintwork is in good condition by cutting a small ‘X’ through the existing paint with a sharp blade and press cellulose tape firmly across the cut, then rip off the tape. If the paint comes off, this means it is unsound and should be removed.

If the surface is sound, give the area a light sand paying attention to any small areas where the paint has peeled or cracked, and fill any defects. After sanding, you can start painting with Dulux Weathershield® immediately, as it is self-priming on most surfaces.

Open and stir your paint thoroughly. Start by cutting in around the edges of your shed and hard-to-reach areas and apply the paint using short, horizontal brush strokes. Smooth over the wet painted section with long brush strokes to smooth the surface.

After you’ve finished painting the first coat, allow at least two hours before applying a second coat. Once dry, follow the same process as you did for the first coat. If you are painting bare timber, you may need to apply a third coat to achieve a consistent, even coverage.